Email: sales01@cxflowmeter.com
whatsapp: 008618049841995
Installation method of clamp-on ultrasonic water flow meter
The installation method of clamp-on ultrasonic water flow meter can be carried out according to the following steps to ensure
that the installation process is clear and accurate:
1. Preliminary preparation
Check pipeline parameters:
Use the matching tools to measure the circumference of the measured pipeline and calculate the pipe diameter
Email: sales01@cxflowmeter.com
whatsapp: 008618049841995
Non-invasive ultrasonic flowmeter is a flowmeter that uses non-contact measurement technology. Its characteristics
and applications can be summarized as follows:
1. Working principle
Non-invasive ultrasonic flowmeter uses the frequency shift (Doppler effect) caused by the flow of fluid when the ultrasonic
signal propagates in the fluid to complete the flow measurement. It does not need to enter the inside of the pipeline, avoiding
interference and pollution to the fluid inside the pipeline.
2. Main features
Non-invasive measurement: It does
Email:sales01@cxflowmeter.com
whatsapp:008618049841995
vortex flow meter working principle
The working principle of vortex flowmeter can be clearly expressed and summarized as follows:
I. Basic principle
The vortex flowmeter is a volume flowmeter that measures the volume flow rate, standard volume flow rate or mass flow rate
of gas, steam or liquid based on the Karman vortex principle. It uses the principle of natural oscillation of fluid to insert a
non-streamlined column (usually a
clamp type flow meter Email: sales01@cxflowmeter.com
whatsapp:008618049841995
Clamp flow meter is a common flow measurement instrument. Its working principle is based on the principle of differential pressure
measurement and has a variety of characteristics and application scenarios. The following is a detailed introduction to clamp flow meters:
working principle
Clamp flow meters calculate flow by measuring the change in pressure caused by fluid passing through a pipe. Two interconnected but
relatively independent pressure sensors are installed in the pipeline. The pressure difference between the two sensors is proportional to
the square of the velocity of the fluid passing through the pipeline. The specific working principle can be simplified to the following steps:
As fluid passes through a clamp-on
Email:sales01@cxflowmeter.com
Whatsapp:008618049841995
What are the types of chemical flow meters?
Chemical flow meters can be classified based on different working principles and structures. Here are some common chemical flow meters
and their characteristics:
Vortex flow meter: suitable for flow measurement of medium to high viscosity liquids, with high accuracy and good stability. Set up a vortex
generator in the fluid, generating regular vortices alternately
Email:sales01@cxflowmeter.com
whatsapp:008618049841995
Thermal mass flow meter working principle
Thermal mass flowmeter is a flow measurement instrument based on the principle of thermal diffusion. Its working principle mainly
relies on the heat exchange relationship between the fluid and the heat source. Specifically, a thermal mass flow meter contains two
sensors inside, one for measuring fluid velocity and the other for measuring gas temperature changes.
During the measurement process, the two sensors are simultaneously placed in the gas being measured. One of the sensors is heated,
while the other senses the temperature
Shanghai JSN Micro Flow Meter CO.,LTD as a high-tech industrial products manufacturing and complete sets of product sales, R & D, production, processing and sales as one, with independent import and export rights of enterprises.
The company's main flow meter, level meter, and pressure controller, temperature controller, analytical instruments and other various types of instrumentation. To solve all kinds of problems, and provide complete sales service for customers with professional technical point of view.
info@microflowmeter.com
