What problems should be paid attention to in the use of liquid turbine flow meter?
We often receive inquiries from customers about what problems should be paid attention to when using the liquid turbine flow sensor,
to ensure that the turbine flowmeter encounters as few problems as possible during the use of the turbine flowmeter, so that the liquid
turbine flow meter can work normally, and let the gas turbine flowmeter manufacturer do it for everyone introduce.
The installation of the liquid turbine flowmeter adopts flange connection, thread connection and clamping type. The sensor should be kept
away from the external magnetic field. If it cannot be avoided, necessary measures should be taken. The liquid turbine flowmeter has a good
anti-corrosion function and can test viscosity and corrosion liquid. The output signal of the turbine flowmeter is pulse, which is easy to digitize.
Pay attention to the following points when using and installing the liquid turbine flowmeter:
First, the instrument installation adopts flange connection, thread connection and clamping type;
Second, when the sensor is installed in the open air, please do a good job of waterproofing the amplifier plug;
Third, the sensor should be kept away from the external magnetic field. If it cannot be avoided, necessary measures should be taken;
Fourth, bypass pipes should be installed outside the straight pipe sections at both ends of the sensor
Fifth, the liquid flow direction during installation should be consistent with the direction of the arrow indicating the flow direction on the
sensor housing.
If you want to know more about the parameters, installation, scope of use, quotation, etc. of the liquid turbine flow meter water flow meter,
please contact winny: sales01@cxflowmeter.com WhatsApp: 008618049841995
hotline
(86)021-57632436