audio industry dispensing epoxy flow meter

sales01@cxflowmeter.com

Sound Dispensing Flow Meter Epoxy AB Glue Flow Meter

Selection data of a cooperative electromechanical company

1. Working condition:

Medium: epoxy resin AB glue

Viscosity: 5000-10000CP

Flow rate: 0.2g/time after mixing, 0.1g/time for single channel (hope to achieve 0.05g/time for single channel)

Temperature: normal temperature

Pressure: normal pressure

Power source: gear pump

Detection: detection of a single dispensing amount

Recommended model: G0.015

Specific working conditions: used in the dispensing industry, used in the audio industry dispensing

2. Industry analysis:

1. Why use a flowmeter:

Monitor single dispensing volume to prevent leaks

2. Disadvantages of not using flowmeter:

     Without a flow meter, there is no way to monitor the amount of glue in a single dispensing, and it is impossible to prevent leaks. 

The product being dispensed may be defective, reworked or scrapped.

If you are looking for a suitable glue flow meter and don't know how to choose, 

please contact winny:sales01@cxflowmeter.com