Gear flow meter

Gear flow meter， Contact email: leon@microflowmeter.com

Gear flow meter technology in the world has been quite mature, we are more common in the country DTO, OGM series, but the measured medium if the viscosity is low, the flow is too small, the leak of domestic flowmeter error is very obvious, can not guarantee the accuracy , Second, the measured medium temperature is too high, the error will increase, and the gear will be stuck may. After long-term use of Gear flow meter its internal gear will be corroded and worn, thus affecting the measurement accuracy . This greatly increased the user's maintenance costs.While deep base Gear flow meter using Siemens CNC machining center, the cutting height of 0.001mm precision, small flow can be measured to 0.1m / min, the temperature up to 200C, etc., in fact, these parameters have been Reached a higher level in the world, and even surpassed Clarke, San Mai, Aobal, Kebao, and other imported gear flow meters, and the deep flowmeter used to ensure that the life of more than 8 years.

Shanghai JSN Micro Flow Meter CO.,LTD is in the wave of market economy struggle, development has been decades, has a high visibility, enjoy good reputation.Main products: super micro liquid flow meter,gear flow meter ,mass flow meter, circle spur gear flow meter,gear pump,gear metering pump etc instrument. With its excellent cost-effectiveness for the user's favor. We have a serious work attitude, solid business foundation, strong sense of solidarity and cooperation, a strong professional and technical staff.
Shanghai JSN Micro Flow Meter Co., Ltd. is the second manufacturer of micro Gear flow meter in China. It is developed by Tu engineer (former Siemens senior engineer) with independent intellectual property rights. The production and processing equipment fully adopts Siemens CNC machining center to ensure the minimum flow 0.1ml / min, which is rare in the world, the accuracy of over 90% of peers. We can do more temperature 200C, the pressure can be customized to 1000bar, many customers use it, but also unbelievable. Also domestic Most of the flowmeter use a year after the new calibration, but the base depth meter after hundreds of conditions of medium test, the service life of more than 8 years, and without secondary calibration, since the establishment of the base depth instrument Instrument determined to be world-class flow meter, breaking the monopoly of international brands in the mirco flow meter industry, so that customers can buy in the country real German-made quality flow meter.

The gear flow meter, which is a type of positive displacement flow meter, is a high-precision type in the flow meter. It uses mechanical measuring elements to continuously divide the fluid into a single known volume part, and repeats according to the measurement chamber one by one. The volume of the volume of fluid filled and discharged to measure the total flow volume. The base of the deep mirco flow meter can use different materials, such as alumina, SS316L stainless steel, special plastic, titanium alloy, etc., in order to adapt to different media and conditions.

1、Tai'an injector nozzle test bench manufacturer: Tai'an is the production base of China's common rail injector test bench. It has produced more than half of China's injector test benches. Previously only KRACHT, OVAL, etc. were selected. Most of us use our CX-M5-AL (5~1000ml/min), the annual purchasing volume exceeds 500 units, and we have specially developed a test bed for the test bench: CX-M3-CRI: 1~400ml/min is used to adapt Most models.
2、McDonald's thermoking cold chain transporter: Remotely monitor the fuel consumption of cold storage and transport vehicle engines via GPS. The cold storage engine uses our CX-M6-AL (0.5~100L/H), and the vehicle engine uses CX-M9-AL (6~ 600L/H), accuracy requirements are 0.5%FS, pass pulse output to GPS module for remote monitoring.

Gear flow meter， Contact email: leon@microflowmeter.com