Compressor Lubricating Oil Flow Meter

sales01@cxflowmeter.com

Actual analysis of bearing lubrication and cooling flow control in a hydraulic lubricating equipment company

Lubricated Bearing Flow Meter

1. Working condition analysis:

Medium: No. 46 hydraulic oil

Viscosity: 46cps

Flow: 2.5L-10L/H

Temperature and pressure: normal temperature pressure: 4kg

Power source: gear pump

Detection method: instantaneous flow monitoring

Display: configure digital display, 4-20ma output

Specific working conditions: It is used for the lubrication and cooling of compressor (centrifugal and screw compressors) 

components, and a flow meter is installed for each oil inlet and oil return for detection.

2. Industry analysis:

  Why use a flowmeter?

Hydraulic oil is used to lubricate and cool the cooling and bearing components on the compressor. The effectiveness of 

lubrication and cooling depends on whether the flow rate of the lubricating oil is within the specified range. If it is too large

 or too small, the cooling and lubricating effect will be poor. For example, if the bearing is damaged due to excessive wear,

 it will cause the compressor to fail to work properly and needs to be repaired. The maintenance cycle is long and the cost 

is high, and it will also affect the normal production of the factory.

If you want to know the specific selection model and quotation, please contact winny:sales01@cxflowmeter.com