新闻资讯PCBanner 新闻资讯wapBanner
首页 > Application > INDUSTRIAL > Hydraulic valve, pump and cylinder test

Hydraulic valve, pump and cylinder test

Date:2018-12-05 source:

Applications-7.jpg



    APPLICATIONS

    The testing of hydraulic valves, pumps and cylinders covers a wide range of flows.  From full flow rates at pressure to small leakage rates, the wider the test stand’s capabilities the greater its ROI and usefulness in the plant.

    Related applications:

    Electro Hydraulic Servo Valves and Proportional Valves

    Hydraulic life cycle testing

    Flow Meters for Aviation Hydraulic Fluids

    Bi-directional flow meter for hydraulic ram


    INDUSTRY PREFERRED TECHNOLOGY

    All JSN Precision Flow Meters are capable of measuring hydraulic fluid.  For large flow rates that require high accuracy test results, JSN offers the following flow meters:


    CX-G0.4

         Factor:  0.4ml/p

         Flow Rate: 0.1-40L/min


    CX-G1.0

          K-Factor: 1ml/p

          Flow Rate: 0.2-80L/min


    CX-G2.0

         K-Factor:  2ml/p

         Flow Rate:  0.5-120L/min


    JSN products have the ability to measure any viscosity fluid without a need to adjust the meter’s K-Factor.  JSN Machinery’s transmitter technology provides for a more robust and reliable signal, an insensitivity to vibration, flow ripple, and prevents over reporting due to pulsations in the system.  Bi-directional fluid flow measurement is available on all products.


    HOW DO YOU BENEFIT?

    Broader 100:1 working range reduces the number of flow meters required

    Not affected by test stand vibration or hydraulic dither

    High pressure ratings up to 6000 psi

    Drift free, reliable K-Factors over wide viscosity ranges

    Bi-Directional flow accuracy not affected by start/stop flow


    JSN Precision Flow Meters provide the operator the ability to precisely test hydraulic components, fine tune flow rates, and create flow control loops in their systems.


    The meters are rugged, dependable, and not affected by changes in the fluid viscosity or flow profile. Even pulsating flow streams are accurately measured.


    Pressure ratings of 3000 psi (210 bar) for Piston Meters and 6000 psi (414 bar) for Gear Meters are standard.

    Bi-directional fluid flow measurement is available on all products

Share to:
Last one: 暂无上一篇


© 2016 Shanghai JSN Micro Flow Meter CO.,LTD  All rights reserved  Shanghai ICP preparation 07036704-1Map | Contact