新闻资讯PCBanner 新闻资讯wapBanner
首页 > Application > INDUSTRIAL > Freon® Refrigeration Design,-Assembly and Test

Freon® Refrigeration Design,-Assembly and Test

Date:2018-12-05 source:

Applications-5.jpg


    APPLICATIONS

    Low viscosity refrigerants like Freon? and other fluorocarbons require a highly accurate amount to be placed in the system during assembly.  These systems need to have little to no internal leakage within the meter and a minimum pressure differential, a counter-intuitive set of parameters.


    INDUSTRY PREFERRED TECHNOLOGY

    Intermittent flow, low viscosity, and high accuracy make JSN Precision Flow Meters the leading choice for refrigeration fluid solutions:

    

    CX-G0.2

           K-Factor:  0.245ml/p.

           Flow Rate:0.16-8L/min


    HOW DO YOU BENEFIT?


    ·Intermittent to continuous stream injection capable with no recalibration

    ·High resolution fraction of a gram accountability

    ·Low viscosity fluids accuracy of 0.5% at 5cp


    Achieving the stated cooling capability of the compressor requires that the proper amount of refrigerant be placed into the unit during assembly. The filling application adds an additional challenge as each fill cycle starts and stops the flow stream. JSN Precision Flow Meters are well suited to batching applications and are not affected by On/Off flow or changes in flow profile. The high resolution of the JSN Meter also aids in the ability to achieve accurate shut off of the flow and precise determination of the amount dispensed into the product.

Share to:


© 2016 Shanghai JSN Micro Flow Meter CO.,LTD  All rights reserved  Shanghai ICP preparation 07036704-1Map | Contact